Wyze Handheld Vacuum

1. Remove the vacuum from the packaging.
2. Fully charge the vacuum using the included Type-C power cable and charger. The status light will flash quickly when charged. Unplug the vacuum from power.
3. To turn on the vacuum and operate in default mode, long press the Power button for 2 seconds. For stronger suction, short press the Power button once.
4. To turn off the vacuum, long press the Power button again for 2 seconds.

Wyze Handheld Vacuum can be used on all dry surfaces to clean dry debris from dust mites to big crumbs. Ideal environments: home, car, office, etc.

No, only use Wyze Handheld Vacuum on dry surfaces to clean dry debris.

Yes, all Wyze Handheld Vacuum orders come with 1 flat suction nozzle. But preorders come with 1 flat suction nozzle plus 1 brush tool, 1 crevice tool, and 1 extension hose.

No, Wyze Handheld Vacuum does not connect to WiFi. It is not an IoT device.

1. Rotate and remove the dust cup
2. Then rotate and remove the prefilter gauze.
3. Pull the HEPA filter out of the prefilter gauze and rinse it with tap water.
4. Once dry, reassemble the handheld vacuum.

Attach the included Type-C power cable to the vacuum and then attach the other end into an adapter compatible with 5V-2A. Then plug it the power adapter into a power outlet.

About 3 hours from 0 to 100% battery.